To Next Page

To Previous Page

The HANNA HI 2212 and HI 2213 are microprocessor based pH and

temperature bench meters.

HI 2213 can also measure Oxidation Reduction Potential (ORP) in mV

range. Relative mV feature is also provided.

pH measurements are compensated for temperature effect manually or

automatically with the HI 7662 temperature probe.

Calibration can be performed at up to three-points using two custom

buffers and five standard buffers.

The GLP feature provides data consistency.

A calibration due alarm can be set to alert the user that too much time

elapsed since the last pH calibration.

PRELIMINARY EXAMINATIONPRELIMINARY EXAMINATION

PRELIMINARY EXAMINATION

Remove the instrument from the packing material and examine it carefully

to make sure that no damage has occurred during shipping. If there is

any damage, notify your Dealer or the nearest Hanna Customer Service

Center.

Each instrument is supplied with:

• HI 1131B Glass-body Combination pH Electrode with 1 m (3.3')

Cable

• HI 7662 Temperature Probe

• HI 76404N Electrode Holder

• pH 4.01 & 7.01 Buffer Solutions (20 mL each)

• HI 7071 Electrolyte Solution

• HI 700661 Electrode Cleaning Solution

• 12VDC Power Adapter

• Instruction Manual

Note: Save all packing material until you are sure that the instrument

functions correctly. All defective items must be returned in the

original packing with the supplied accessories.

GENERAL DESCRIPTIONGENERAL DESCRIPTION

GENERAL DESCRIPTION

Hanna Instruments HI 2212 User Manual

Questions and Answers: