35
For NaCl Range
• The conductivity and temperature reading value as described in TDS
Range.
• The time and date as described in pH Range.
• The salinity factor on the primary LCD and “cF” message on the
secondary LCD, with “LOG” and “NaCl” tags displayed.
• The reference temperature, the temperature compensation mode
and the cell constant message as described above.
Note: After LOG is pressed or “dEL” is confirmed, the instrument will
display the amount of free log space for about one second
(example 25 records free).
Press the ALT&RCL keys to leave RECALL mode at any time.
NaCl
LOG
Note: When an information that does not display the record number
is selected, pressing the SETUP key will display the record
number on the secondary LCD line.
To Next Page
Loading...
Need help?
General
