Hanna Instruments HI 8711 User Manual

57
installed without special connectors.
AmpHel
®
electrodes have a micro-amplifier in
the electrode cap to boost the signal, drasti-
cally reducing susceptibility to noise and drift.
With all of the components sealed in the
electrode body, moisture up to 100% RH will
not effect the signal.
LONG DISTANCE, INDOOR/OUTDOOR IN-
STALLATIONS, ISOLATED OUTPUT FOR
COMPUTER INTERFACE
If your application has a distance greater
than 50 m (165'), it is necessary to install a
transmitter between the electrode and the
meter.
Hanna offers a full line of pH/ORP transmit-
ters with or without LCD displays.
AmpHel
®
is a registered Trademark of "Hanna Instruments"
pH METER
WITH A pH TRANSMITTER AND
CONVENTIONAL ELECTRODE
MEASUREMENTS CAN BE
TAKEN FROM DISTANCES UP TO
300 METERS (1000 FEET)
WET ENVIRONMENT
RELATIVE HUMIDITY UP TO 100%
3m
MAXIMUM 300 METERS
pH-ORP METER
pH METER
WITH AN AmpHel ELECTRODE
MEASUREMENTS CAN BE
TAKEN FROM DISTANCES UP TO
50 METERS (165 FEET)
WET ENVIRONMENT
RELATIVE HUMIDITY UP TO 100%
MAXIMUM 50 METERS
®
pH-ORP METER

Hanna Instruments HI 8711 Specifications

General

Brand	Hanna Instruments
Model	HI 8711
Category	Controller
Language	English