CE DECLARATION OF CONFORMITY
Recommendations for Users
Before using these products, make sure that they are entirely suitable for the environment
in which they are used.
Operation of these instruments in residential area could cause unacceptable interferences
to radio and TV equipments, requiring the operator to take all necessary steps to correct
interferences.
The trimmers are sensitive to electrostatic discharges. It is recommended to use antistatic
screwdrivers.
Any variation introduced by the user to the supplied equipment may degrade the instruments'
EMC performance.
To avoid electrical shock, do not use these instruments when voltages at the measurement
surface exceed 24VAC or 60VDC.
To avoid damages or burns, do not perform any measurement in microwave ovens.
DECLARATION OF CONFORMITY
We
Hanna Instruments Srl
V.le delle industrie 12
35010 Ronchi di Villafranca (PD)
ITALY
herewith certify that the process controllers
have been tested and found to be in compliance with the following regulations:
IEC 801-2 Electrostatic Discharge
IEC 801-3 RF Radiated
IEC 801-4 Fast Transient
EN 55022 Radiated, Class B
Date of Issue: 29-03-1996
D.Volpato - Engineering Manager
On behalf of
Hanna Instruments S.r.l.
HI 8510E HI 8510T HI 8512E HI 8512T
HI 8710E HI 8710T HI 8720E HI 8720T
HI 8711E HI 8711T HI 931500 HI 931501
HI 932500
To Next Page
Loading...
Need help?
General
