33
• Press LOG/CFM or READ u to start editing
the month value. The month value will start
blinking.
• Press the s or t keys to set the month
value.
• Press LOG/CFM or READ u to start editing
the day value. The day value will start blinking.
• Press the s or t keys to set the day value.
Note: To edit the year again, after the day was
set, press READ u.
• Press LOG/CFM to save the new date. The
new date will be displayed on the LCD.
Alternatively, press CAL to exit without saving
the changes.
SET THE TIME
• To set the current time, press CAL when set
time panel is displayed. The time format is
hh:mm. The hour value and “CFM” tag will
start blinking.
• Press the s or t keys to set the hour value.
• Press LOG/CFM or READ u to start editing
the minutes. The minutes value will start
blinking.
• Press the s or t keys to set the minutes
value.
Note: To edit the hour again, after the minutes
were edited, press READ u.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
