21
• Press READ to start the average reading mode.
The display will show blinking dashes and the
icons for cuvet, detectors and LED will appear
during measurement. When a new partial value
is displayed, the cuvet icon and the measurement
unit will blink shortly.
When the measurement is ended, the final
averaged result is displayed directly in FTU.
RANGE AND UNITS
HI 98713 automatically selects the correct range
to display the results with the highest accuracy. If
the measured value is higher than 1000 FTU (over
range), the display will show the maximum value
blinking.
To Next Page
Loading...
Need help?
General
