Hanna Instruments HI 98713 - Measurement Units

7
MEASUREMENT UNITSMEASUREMENT UNITS
MEASUREMENT UNITSMEASUREMENT UNITS
MEASUREMENT UNITS
Many methods were used to measure turbidity over the years. The Jackson Candle Turbidimeter was
used to measure turbidity as Jackson turbidity units (JTU). The Secchi Disk is commonly used to
measure turbidity in lakes and other deep waters (mg/L SiO
22
22
2
). Both methods are visual and are not
considered very accurate. To obtain more accurate readings a formazin based meter should be used
as a turbidity reading instrument.
The HI 98713 turbidimeter reports the measurements only in FTU (Formazin Turbidity Units).
The conversion table between these measurement units is shown bellow:
UTJUTFOiS
2
)L/gm(
UTJ 19105.2
UTF 350.0131.0
OiS
2
)L/gm( 4.05.71