31
SETUPSETUP
SETUPSETUP
SETUP
• To enter/exit SETUP, press SETUP/DEL.
• To select the parameter to be edit, press UP or
DOWN keys until the desired panel is displayed.
SET BEEPER
The HI 98713 has a built-in beeper that signals
the tag read, the key press and the error conditions.
The beeper can be selected to be ON or OFF.
• To set the beeper ON/OFF, press CAL when set
beeper panel is displayed.
The beeper status and “CFM” tag will start
blinking.
• Press the UP or DOWN keys to set the beeper
ON/OFF.
• Press LOG/CFM to save the change. The new
selected option will be displayed on the LCD.
Alternatively, press CAL to exit without saving
the changes.
SHOW / HIDE THE TIME
You can choose between showing or hiding the
current hour and minutes on the LCD.
• To set hiding or showing the time, press CAL
when show/hide time panel is displayed.
The time show status and “CFM” tag will start
blinking.
• Press the UP or DOWN keys to set lcd / hide for
time.
Setup mode allows viewing and modifying the instrument parameters.
The blinking “CAL” tag during setup mode suggest to press CAL for parameters editing.
To Next Page
Loading...
Need help?
General
