33
SET THE TIME
• To set the current time, press CAL when set time
panel is displayed. The time format is hh:mm.
The hour value and “CFM” tag will start
blinking.
• Press the UP or DOWN keys to set the hour
value.
• Press LOG/CFM or READ
to start editing the
minutes. The minutes value will start blinking.
• Press the UP or DOWN keys to set the minutes
value.
Note: To edit the hour again, after the minutes
were edited, press READ
.
• Press LOG/CFM to save the new time. The new
set time will be displayed.
Alternatively, press CAL to exit without saving
the changes.
SET INSTRUMENT ID
The instrument ID is a four digit number that can
be edited by the user. The instrument ID is
downloaded on the PC application, together with
the logged data. By setting a different ID for each
instrument it is possible to mix information from
many turbidimeters into the same database.
• To set the instrument ID, press CAL when set
instrument ID panel is displayed.
The default instrument ID is 0000. The existing
ID value and “CFM” tag will start blinking.
• Press the UP or DOWN keys to set the new
instrument ID. By pressing and holding the UP
or DOWN keys, the changing speed wil increase.
To Next Page
Loading...
Need help?
General
