24
Press LOG to save a complete set of data regarding the SOUR test.
Press Start to begin a new SOUR test.
Notes: If the DO reading is less than the minimum end DO value set during SOUR configuration,
a warning message will be displayed.
Press any key to clear the message from the screen, or press HELP to view detailed information
about the warning.
If the DO value is greater than the DO value from the beginning of the test an error message
will be displayed.
Press Start to begin a new SOUR test or ESC to return to the SOUR measure screen.
SOUR MEASUREMENT
To Next Page
Loading...
Need help?
General
