36
Manual Pressure
Highlight Manual pressure.
Press the displayed functional key to enable/disable the feature.
If enabled, the pressure can be entered by the user, while in measurement screen, using / keys.
Pressure Unit
Highlight Pressure unit.
Press Modify.
Autodelete BOD Start Data
Highlight Autodelete BOD start data.
Press the displayed functional key to enable/disable the feature.
If enabled the BOD initial data record used in BOD result evaluation is deleted automatically after the
BOD result has been saved into the instrument’s memory (LOG key pressed).
If disabled, the user has to delete BOD initial data records that were used in BOD result evaluation,
entering View initial BOD data mode.
SETUP
To Next Page
Loading...
