Hansa C13 PTO - What Can My Hansa Chipper Process; Intended Uses of the Chipper; Receiving Your Hansa Chipper; Chipper Components (C13 Pto)

Hansa C13/C21 PTO O&M Manual – OM-008 Revision E 13/06/2019
© Hansa Chippers 2019
1
What can my Hansa chipper process?
Intended uses of the chipper
The Hansa C13/C21 PTO chipper is built to process organic material including wooden branches not exceeding 90 mm / 130 mm
diameter respectively. It is designed to be used on a regular basis to maintain large gardens, lifestyle blocks, acreages, along with
use by semi commercial garden maintenance contactors. Do NOT use the chipper for any other purpose.
Organic wastes include:
Prunings, stalks, roots, vegetable matter, hay, grass, bark
Dry manure
Branches
Palm fronds
Dead and hard timbers (Note: these will dull the knives faster)
Paper or cardboard
Do NOT process:
Flax, root balls
Soil, bones, sand, grit, stones, metal
If you have any questions, contact your authorised dealer.
Do NOT exceed 90 mm (C13 PTO) / 130 mm (C21 PTO) branch diameter
Receiving your Hansa chipper
Chipper components (C13 PTO)
C13 PTO
C21 PTO