To Next PageTo Next Page
Need help?Do you have a question about the Hansa C7 and is the answer not in the manual?
Details the chipper's designed purpose and compatible materials.
Identifies and labels the main parts of the Hansa C7 chipper.
Lists the tools needed for assembling the Hansa C7 chipper.
Details the components included in Box 1 and Box 2 for assembly.
Warns about the weight of the chipper body during assembly.
Lists and illustrates the specific fasteners and hardware included in the pack.
Provides step-by-step instructions for assembling the main body of the chipper.
Details the process of fitting the wheels onto the chipper's axles.
Explains how to fasten the wheels to the chipper body using specific hardware.
Guides on how to attach the outlet chute to the chipper body.
Details securing the remaining part of the outlet chute to the chipper body.
Provides instructions on how to install the inlet chute correctly.
Explains the process of attaching the swivel handle to the engagement handle.
Outlines the necessary skills and conditions for safe operation.
Lists potential hazards and corresponding corrective actions for safe operation.
Describes how to attach the emergency stop bracket to the inlet chute.
Advises on protection against noise and discharge material hazards.
Covers safe practices for feeding material and handling fuel.
Lists essential checks to perform before starting the chipper.
Provides guidelines and precautions for refuelling the chipper.
Lists all mandatory actions for safe operation, including PPE and posture.
Lists prohibited actions to prevent accidents and damage during operation.
Details materials or conditions to avoid when processing with the chipper.
Warns against overloading the chipper and altering engine settings.
Ensures safe setup is completed before starting the engine.
Details setting the throttle and engaging the belt drive for starting.
Explains the correct method for pulling the cord to start the engine.
Guides on adjusting the choke lever after the engine has warmed up.
Outlines the steps to safely shut down the engine and stop the rotor.
Provides specific advice for processing fibrous materials effectively and safely.
Specifies the type of petrol required and safety warnings for handling it.
Advises on how to store the chipper safely when not in use.
Describes methods for moving the chipper manually and with a vehicle.
Provides guidance on lifting the chipper and handling its components safely.
Lists causes and solutions for the chipper failing to start.
Addresses issues where the chipper slows down or stops during operation.
Explains solutions for material ejection issues like long strips or clogging.
Outlines essential maintenance tasks and intervals for the chipper.
Identifies symptoms indicating the chipper's knives need sharpening or replacement.
Lists the tools and materials required for sharpening the chipper knives.
Details how to access the cutting rotor by removing the housing cover.
Explains the procedure for detaching the knives from the cutting rotor.
Describes the correct angle and method for sharpening the chipper knives.
Guides on cleaning surfaces and remounting knives with correct torque.
Explains how to adjust the anvil for optimal knife performance and clearance.
Details how to check and change the engine oil for optimal performance.
Explains how to verify the correct tension of the chipper's drive belts.
Provides steps for adjusting the belt tension using the adjustment nuts.
Shows visual indicators of belts that need replacement.
Outlines the process of removing old belts and installing new ones.
Specifies the maximum recommended tyre pressure for the chipper.
Lists recommended torque values for various bolt sizes used on the chipper.
Provides key dimensions, weight, and motor details of the Hansa C7.
Details specifications related to the cutting system, feed mechanism, and discharge.
Explains requirements for registering the product and maintaining it for warranty coverage.
Lists conditions and damages not covered by the HANSA warranty.
Compares warranty durations for domestic and commercial use, registered vs. non-registered.
Outlines owner rights, warranty limitations, and governing laws.
Shows various safety decals, their meaning, and where they are placed on the chipper.
Presents the measured sound power and pressure levels of the Hansa C7 chipper.
States the mandatory use of hearing protection due to sound levels.
Provides manufacturer information and product identification for conformity declaration.
Lists the EU directives and standards the product conforms to.
General
