Hansa C27 - User Manual

MANUFACTURER: HANSA NEW ZEALAND
+64 7 849 4749 info@hansaproducts.co.nz
www.hansaproducts.com
REST OF WORLD:
Please refer to www.hansaproducts.com for
a current list of our authorised dealers and
contact details relevant to your territory
Operation, maintenance and safety manual
Original
Inst
ructions
All operators must fully read and understand
this operator’s manual before using the chipper.
Keep this manual for future reference.

Summary

What can my Hansa chipper process?

Intended uses of the chipper

Details the purpose and acceptable materials for the chipper.

Receiving your Hansa Brush Chipper

Chipper components

Identifies key external parts of the Hansa C27 brush chipper.

Engine components

Safety

Operator competency

Outlines requirements for safe operation and operator qualifications.

Identifying hazards and risks

Lists potential hazards and necessary corrective actions for safe operation.

Towing safety

Operation

Outlet chute adjustment

Explains how to adjust the discharge chute for material direction.

360-degree turntable adjustment

Details how to rotate the chipper body for flexible feeding.

Feed roller control

Automatic Feed Controller (AFC)

Hour meter; tachometer

Emergency stop

Checklist before operation

Safe setup procedures

Safe operating procedures

DO NOT:

Starting procedure

Shutdown procedure

Troubleshooting

What to do if:

Provides solutions for common operational problems like starting issues.

Maintenance & service

Knife re-sharpening and knife replacement

Remove the knives for sharpening

Sharpen the knives

Reinstall the knives

Anvil adjustment

Anvil replacement

Belt tension

Belt tension adjustment

Belt replacement

Greasing bearings & pivot points

Hydraulic system

Engine servicing

Other servicing

Rotor bearing replacement

Tyre Pressure

Maintenance & service intervals

Bolt torque

Specifications

HANSA global industrial limited warranty

HANSA Product Warranty Period

General

Labels

Feed roller control

Stopping procedure

Starting procedure

Pulley guard safety (x2)

Rotor and housing safety

Outlet chute and deflector safety labels

Guaranteed sound power level label

Sound output information

EC Declaration of Conformity

Hansa C27 Specifications

General

Brand	Hansa
Model	C27
Category	Chipper
Language	English