Hansa C27 - What can my Hansa chipper process?; Intended uses of the chipper; Receiving your Hansa Brush Chipper; Chipper components

Hansa C27EU O&M Manual – OM-023 Revision A 16/10/19
© Hansa Chippers 2019
1
What can my Hansa chipper process?
Intended uses of the chipper
The C27 Hansa chipper is built to process organic material including wooden branches not exceeding 160 mm in diameter. It is
designed to be used on by commercial arborists, tree contractors and hire / rental companies. Do NOT use the chipper for any
other purpose.
Organic wastes include:
Prunings, stalks, roots, vegetable matter, hay, grass, bark
Branches
Palm fronds
Dead and hard timbers (Note: these will dull the knives faster)
Paper or cardboard
Do NOT process:
Flax, root balls
Soil, bones, sand, grit, stones, metal
If you have any questions, contact your authorised dealer.
Do NOT exceed 160 mm branch diameter
Receiving your Hansa Brush Chipper
Congratulations on the purchase of a Hansa Model C27 Brush Chipper.
Chipper components