To Next PageTo Next Page
Need help?Do you have a question about the Hansa C60RX and is the answer not in the manual?
Details what the chipper is designed to process and what to avoid.
Identifies and illustrates the main parts of the chipper.
Requirements for operators, identifying hazards, and implementing corrective actions.
Guidelines for towing and operating the chipper's track system safely.
Critical safety measures for winch operation and the chipping process.
Details crucial steps for setting up the chipper safely before operation.
Lists essential actions for safe operation, including wearing safety gear and proper feeding.
Lists critical actions to avoid for safe operation, preventing injury and damage.
Details material types, capacity, and recommended tools for feeding.
Covers outlet chute, feed roller, AFC, LED panel, hour meter, and winch.
Outlines emergency stop, starting, and shutdown sequences.
Guides on pairing the remote and operating the track drive system.
Addresses chipper start failures, belt drive engagement, and belt noise.
Covers discharge, noise, vibration, stalling, and feed roller problems.
Explains knife sharpening, replacement, and anvil adjustment.
Details belt tension, replacement, hydraulic pump belt, and greasing points.
Covers hydraulic, engine, track maintenance, and service intervals.
Lists detailed technical data for the chipper, including dimensions and capacities.
Provides a table of recommended torque values for various bolt sizes.
Illustrates decals for general safety, controls, and operating procedures.
Shows decals related to service checks, component safety, and warnings.
General
