To Next PageTo Next Page
Need help?Do you have a question about the Hansa C3e and is the answer not in the manual?
Covers operator competency, ambient conditions, work area, electrical, and personal safety guidelines.
Guidelines for using, caring for, and servicing the chipper correctly.
Identifies common hazards and outlines corrective actions for safe operation.
Details acceptable organic wastes and materials that should not be processed by the chipper.
Identifies the main parts of the Hansa C3e chipper and initial assembly steps.
Step-by-step instructions for securely attaching the wheels to the chipper body.
Instructions on how to attach the inlet chute using bolts, washers, and nuts.
Instructions on how to hook and secure the optional chip catcher bag to the outlet chute.
Steps to ensure the chipper is correctly positioned and ready for safe operation.
Guidelines for safe use, including PPE, feeding material, and avoiding common hazards.
Lists actions to avoid during operation to prevent accidents and damage.
Details voltage, current, and RCD requirements for connecting the chipper safely.
Procedures for starting and stopping the motor, including necessary safety checks.
Tips for processing fibrous materials and maintaining blade sharpness for efficiency.
How to move, store, and care for the chipper, plus solutions for common issues.
How to identify when knives need sharpening and the process for re-sharpening or replacement.
Detailed instructions with images on how to remove the inlet chute and cutting rotor housing.
Guidance on sharpening knives using a grinder and balancing the rotor after service.
Instructions for remounting knives, tightening bolts, and checking rotor clearance.
How to adjust the anvil for correct knife clearance and ensure free rotor turning.
Steps for reassembling the housing and inlet chute after maintenance.
Table listing recommended torques for different bolt sizes and strength classes.
Key specifications of the Hansa C3e chipper, including dimensions, motor, and capacity.
Identifies safety and operational decals and their specific locations on the chipper.
Requirements for registering the product and maintaining warranty coverage.
Lists conditions and damages that are not covered by the warranty.
Details warranty periods, limitations, customer rights, and governing laws.
Information on registering the chipper online and retailer responsibilities for setup.
General
