Hansa C3e - Assembling Your Chipper

Hansa C3e O&M Manual - OM-004 Revision H 09/07/2019
© Hansa Chippers 2019
5
Box 2 contains:
✓ The inlet chute
✓ A fastener pack containing parts required for assembly
✓ Documentation (Hansa operations manual, warranty card and Honda motor manual)
Item no.
Fastener pack contents (in box 2)
1
Two bolts to attach the inlet chute.
2
Two heavy washers to attach the inlet chute.
3
Two spring washers to attach the inlet chute.
4
Two nuts to attach the inlet chute.
Wheels and cardboard block
Chipper body
Contents in box 2
Inlet chute
Documentation
Fastener pack