Hansa C3e - Hansa Chipper Processing Capabilities; Intended and Prohibited Materials

Hansa C3e O&M Manual - OM-004 Revision H 09/07/2019
© Hansa Chippers 2019
3
operating the machinery
Weight of the chipper
Straining, crushing
Place the machinery on firm level ground
What can my Hansa chipper process?
Intended uses of the chipper
The Hansa C3e chipper is built to process organic material including wooden branches not exceeding 40 mm in diameter. It is
designed for intermittent use by the suburban gardener. Do NOT use the chipper for any other purpose.
Organic wastes include:
Prunings, stalks, roots, vegetable matter, hay, grass, bark
Dry manure
Branches
Palm fronds
Dead and hard timbers (Note: these will dull the knives faster)
Paper or cardboard
Do NOT process:
Bones
Soil, root balls, sand, grit, stones, metal
If you have any questions, contact your authorised dealer.
Do NOT exceed 40 mm branch diameter