Hanseatic HWMB714A3 User Manual

Page GB-15
Washing process
Requirements
– You have read the “Safety” chapter from
GB-4 and understand all the safety instruc-
tions.
– The transportation packaging is removed
and the appliance is prepared as described
in chapter “Installing and connecting the
washing machine” on page GB-23.
– The inlet hose (b) and the outlet hose (15)
are properly connected.
Starting the cycle
1. Switch on the device and select the wash-
ing cycle desired as described above.
2. Open the valve completely.
Zeit sparen
Hemden
Pflegeleicht
Baby Comfort
Jeans
Mix
Buntwäsche
Abpumpen
Schleudern
Individuell
Baumwolle
Handwäsche
U/Min
Temperatur
wahl
Vorwäsche
Start/Pause
3 Sek.
Tür Entriegelung
3 Sek. drücken für Individuell
Ein/Aus
Extra
Spülen
Startzeit-
vorwahl
Sportwäsche
Express 15`
Feines
Wolle
Spülen
Zeit sparen
(9)(21)
(5)
3. Press the Start/Pause button (9).
– The cycle starts.
– You can identify the cycle status from
the remaining wash time (5) displayed,
as well as the flashing symbol (21).
Pre-wash
Main wash
Rinse
Spin
– The door is locked (indicated by the pad-
lock symbol ).
– You cannot adjust, select or deselect
settings while the cycle is active.
Suspending and continuing
the cycle
Please note that a long pause can affect the
wash result, as the suds cool down.
• If you would like to pause the active cycle,
e.g. to add laundry, press the Start/Pause
button (9). The spin speed display will blink
while the cycle is paused.
You can only add laundry if the water
temperature and the water level per-
mits this (indicated by symbol ).
• To add laundry, you must first unlock the
door. Hold the Start/Pause button (9) for
approx. 3 seconds.
• The padlock symbol
will disappear from
the display; the door is now released and
you can add laundry.
• To continue the cycle, press the Start/
Pause button (9) again.
Suspending/altering the cycle
1. To interrupt or amend an active cycle,
press the On/Off button (8).
All indicators on the display disappear.
2. Switch the appliance on again and set a
new cycle with the cycle selector (2) and
refill the washing detergent, if necessary.
3. Start the new cycle with the Start/Pause
button (9).
Washing process

Hanseatic HWMB714A3 Specifications

General

Brand	Hanseatic
Model	HWMB714A3
Category	Washer
Language	English