Page GB-25
Installing and connecting the washing machine
Connecting the washing
machine
NOTICE
Risk of damage to property!
Improper handling of the appliance
may result in damage.
■ Only use the hoses supplied (water in-
let and outlet hose). Do not use old
hoses.
■ Do not extend or replace the hoses
with others.
■ The hoses should not be kinked or
twisted.
■ CAUTION: Do not connect to the hot
water supply.
■ Only connect the appliance to a wa-
ter supply with an inlet water pressure
between 0.1MPa and 1.0MPa (1.0 to
10.0bar). For higher water pressure,
a pressure regulator needs to be or
-
dered. Contact your water company
for the water pressure, if necessary.
■ Only hand-tighten the union nut of
the inlet hose on the valve. Do not
use a pipe wrench, otherwise the un
-
ion nut may be damaged.
Creating a water drain
There are several options for connecting the
outlet hose:
Variant 1: Connect outlet hose directly to a
siphon.
Variant 2: Allow suds to drain into a floor drain.
Variant 3: Allow suds to drain into a wash ba-
sin or bath.
To Next Page
Loading...
Need help?
General