Hanseatic V18C01A-80 User Manual

Care and maintenancePage EN-26
3. Lift out the hygiene filter (39).
4. Rinse the hygiene filter only
with clean water, tap it out and/
or clean it with compressed
air. Never use detergent or
washing-up liquid to clean the
hygiene filter.
5. Let the hygiene filter dry out
completely.
6. Reinsert the hygiene filter and
the filter cover.
The article numbers for
re-ordering motor protec-
tion and hygiene filters are
listed in chapter “Service” on
Page EN-29.
Cleaning the appliance
WARNING
Risk of electric shock!
Improper use of the appli
-
ance may lead to serious
injury or death.
■ Before cleaning the appli-
ance, pull the mains plug
out of the socket.
■ Ensure that no water seeps
into the appliance.
■ Never immerse the appli-
ance in water.
■ Only insert the mains plug
into the socket if all appli
-
ance components are com-
pletely dry.
NOTICE
Risk of damage to property!
Improper cleaning of the
appliance can impair the
surface.
■ Do not use any abrasive
cleaners (scouring or thin
-
ning agents) to clean the
appliance.
• Wipe
– the housing,
– the inside of the air vent (5)
and
– the accessories
with a damp cloth as required.
Never allow liquid to penetrate
the vacuum.
• Occasionally, clean the air vent
with a soft brush.
Cleaning the floor
nozzle
• Occasionally vacuum the un-
derside of the floor nozzle (14)
with the crevice nozzle (16).

Hanseatic V18C01A-80 Specifications

General

Power source	AC
Maximum input power	800 W
Annual energy consumption	- kWh
HEPA class	HEPA 12
Proper use	Home
Noise level	75 dB
Cleaning surfaces	Bare floor, Carpet, Hard floor, Soft floor, Stair steps, Upholstery
Vacuum air filtering	HEPA
Dirt separating method	Cyclonic
Type	Cylinder vacuum
Cleaning type	Dry
Dust capacity	3.5 L
Flexible hose	Yes
Product color	Silver
Number of wheels	2 wheel(s)
Dust container type	Bagless
Cord length	5 m
Handle type	Standard handle
Control type	Rotary
Handles quantity	1
Number of nozzles	4

Weight and Dimensions

Depth	410 mm
Width	270 mm
Height	240 mm
Weight	5800 g