Hantek DSO2000 Series

SCPI Programmers Manual
37
4.18.6 TRIGger:SPI:MASK
4.18.7 TRIGger:SPI:ALEVel
4.18.8 TRIGger:SPI:BLEVel
4.19 TRIGger:PATTern
Command List
⚫ TRIGger:PATTern: PATTern
⚫ TRIGger:PATTern:LEVel
4.19.1 TRIGger:PATTern:PATTern
:TRIGger:SPI:DATA?
Description
Set or query the data value triggered by SPI.
Parameters
:<data> ::= 0—(2
32
-1)
Return
The query returns an integer.
Example
:TRIGger:SPI:DATA 20 /*Set the data value to 20*/
:TRIGger:SPI:DATA? /*The query returns 20*/
Command
:TRIGger:SPI:MASK <mask>
:TRIGger:SPI:MASK?
Description
Set or query the mask value when the SPI triggered.
Parameters
:<mask> ::= 0—(2
32
-1)
Return
The query returns an integer.
Example
:TRIGger:SPI:MASK 20 /*Set the mask value to 20*/
:TRIGger:SPI:MASK? /*The query returns 20*/
Command
:TRIGger:SPI:ALEVel <level>
:TRIGger:SPI:ALEVel?
Description
Set or query the trigger level of the clock channel when SPI triggers.
Parameters
:<level> ::= trigger level value (in V)
Return
The query returns the trigger level in scientific notation.
Example
:TRIGger:SPI:ALEVel 0.16 /*Set the trigger level to 160mV*/
:TRIGger:SPI:ALEVel? /*The query returns 1.600000e-01*/
Command
:TRIGger:SPI:BLEVel <level>
:TRIGger:SPI:BLEVel?
Description
Set or query the trigger level of the data channel during SPI trigger.
Parameters
:<level> ::= trigger level value (in V)
Return
The query returns the trigger level in scientific notation.
Example
:TRIGger:SPI:BLEVel 0.16 /*Set the trigger level to 160mV*/
:TRIGger:SPI:BLEVel? /*The query returns 1.600000e-01*/
Command
:TRIGger:PATTern:PATTern <pa_ch1>[,<pa_ch2>[,<pa_ch3>
[,<pa_ch4>[,<pa_d0>…[,<pa_d15>]]]]]
:TRIGger:PATTern:PATTern?
Description
Set or query the pattern of each channel when the pattern is triggered.
Parameters
Name
Type
Range
Default