Hantek DSO2000 Series Programmer's Manual

SCPI Programmers Manual
55
12.6 SETUp:ALL?
:SYSTem:LOCKed?
Description
Turn the keyboard lock function on or off, or query the status of the keyboard lock
function.
Parameters
:<bool> ::= {{1 | ON} | {0 | OFF}
Return
The query returns ON,OFF.
Command
:SETUp:ALL?
Description
Get all the states needed to boot up at once.
Return
A string containing each setting, and each status is separated by ";".
Remark
Channel enable: <Detailed view CHANnel<n>:DISPlay>
Channel coupling: <Detailed view CHANnel<n>:COUPling>
Channel bandwidth limit: <Detailed view CHANnel<n>:BWLimit>
Probe ratio: <Detailed view CHANnel<n>:PROBe>
Voltage gear: <>
Channel offset: The offset (one value) of the waveform relative to the center line (the
value is zero, the upward is positive, and the downward is negative).
Large divisions represent 25 values). For example, the offset value of channel 1 is
75, which means that the center line is offset by three large divisions.
Channel inversion: <Detailed view CHANnel<n>:INVert>
Running status: <Detailed view RUNning>
Acquisition mode: <Detailed view ACQuire:MODe>
Collection type: <Detailed view ACQuire:TYPE>
Trigger method: <Detailed view TRIGger:SWEep>
Time base value: <Detailed view TIMebase:SCALe>
(Placeholder):
Sampling rate: The returned value represents the current sampling rate.
Storage depth: <For details, see ACQuire:POINts>
Trigger type: <Detailed view TRIGger:MODE>
(Placeholder):
Edge trigger source: <Detailed view TRIGger:EDGe:SOURce>
Edge trigger level: <See TRIGger:EDGe:LEVel for details>
Edge trigger polarity: <See TRIGger:EDGe:SLOPe for details>
Pulse width trigger source: <See TRIGger:PULSe:SOURce for details>
Pulse width trigger level: <See TRIGger:PULSe:LEVel for details>
Pulse width trigger polarity: <See TRIGger:PULSe:POLarity for details>
Pulse width trigger condition: <See TRIGger:PULSe:WHEN for details>
Pulse width trigger width: <For details, see TRIGger:PULSe:WIDth>
Timeout trigger source: <For details, see TRIGger:TIMeout:SOURce>
Timeout trigger level: <For details, see TRIGger:TIMeout:LEVel>
Timeout trigger polarity: <For details, see TRIGger:TIMeout:POLarity>
Timeout trigger width: <For details, see TRIGger:TIMeout:WIDth>
Slope trigger source: <For details, see TRIGger:SLOPe:SOURce>
Slope trigger level a: <See TRIGger:SLOPe:ALEVel for details>
Slope trigger level b: <For details, see TRIGger:SLOPe:BLEVel>
Slope trigger polarity: <See TRIGger:SLOPe:POLarity for details>
Conditions for slope triggering: <For details, see TRIGger:SLOPe:WHEN>
Slope trigger width: <For details, see TRIGger:SLOPe:WIDth>
Video trigger source: <For details, see TRIGger:TV:SOURce>
Video trigger level: <See TRIGger:VIDeo:LEVel for details>
Video trigger polarity: <See TRIGger:TV:POLarity for details>
Video trigger standard: <Detailed view TRIGger:TV:STANdard>
Video trigger synchronization: <For details, see TRIGger:TV:MODE>
The number of lines triggered by the video: <See TRIGger:TV:LINE for details>

Hantek DSO2000 Series Specifications

General

Brand	Hantek
Model	DSO2000 Series
Category	Test Equipment
Language	English