Hantek DSO2000 Series Programmer's Manual

SCPI Programmers Manual
4
Contents
Introduction to SCPI commands .......................................................................................................... 2
1. CHANnel<n> Command Subsystem ................................................................................................. 9
1.1 CHANnel<n>:BWLimit ............................................................................................................ 9
1.2 CHANnel<n>:COUPling ........................................................................................................... 9
1.3 CHANnel<n>:DISPlay ............................................................................................................ 10
1.4 CHANnel<n>:INVert ............................................................................................................. 10
1.5 CHANnel<n>:OFFSet ............................................................................................................ 10
1.6 CHANnel<n>:SCALe .............................................................................................................. 11
1.7 CHANnel<n>:PROBe ............................................................................................................. 11
1.8 CHANnel<n>:VERNier ........................................................................................................... 11
2. TIMebase Command Subsystem .................................................................................................... 12
2.1 TIMebase:WINDow:ENABle ................................................................................................. 12
2.2 TIMebase:WINDow:POSition ............................................................................................... 12
2.3 TIMebase:WINDow:SCALe ................................................................................................... 13
2.4 TIMebase:POSition ............................................................................................................... 13
2.5 TIMebase:SCALe ................................................................................................................... 13
2.6 TIMebase:RANGe ................................................................................................................. 13
2.7 TIMebase:MODE .................................................................................................................. 13
3. ACQuire Command Subsystem ...................................................................................................... 14
3.1 ACQuire:POINts .................................................................................................................... 14
3.2 ACQuire:TYPE ....................................................................................................................... 14
3.3 ACQuire:SRATe? ................................................................................................................... 15
3.4 ACQuire:COUNt .................................................................................................................... 15
4. TRIGger Command Subsystem ....................................................................................................... 15
4.1 TRIGger:FORCe ..................................................................................................................... 16
4.2 TRIGger:MODE ..................................................................................................................... 16
4.3 TRIGger:STATus? .................................................................................................................. 16
4.4 TRIGger:SWEep .................................................................................................................... 17
4.5 TRIGger:HOLDoff .................................................................................................................. 17
4.6 TRIGger:EDGe ....................................................................................................................... 17
4.6.1 TRIGger:EDGe:SOURce .............................................................................................. 17
4.6.2 TRIGger:EDGe:SLOPe ................................................................................................ 18
4.6.3 TRIGger:EDGe:LEVel .................................................................................................. 18
4.7 TRIGger:PULSe...................................................................................................................... 18
4.7.1 TRIGger:PULSe:SOURce............................................................................................. 18
4.7.2 TRIGger:PULSe:POLarity ............................................................................................ 18
4.7.3 TRIGger:PULSe:WHEN ............................................................................................... 19
4.7.4 TRIGger:PULSe:WIDth ............................................................................................... 19
4.7.5 TRIGger:PULSe:LEVel ................................................................................................. 19
4.8 TRIGger:SLOPe ..................................................................................................................... 19

Hantek DSO2000 Series Specifications

General

Brand	Hantek
Model	DSO2000 Series
Category	Test Equipment
Language	English