Basic Operation
DSO4000 Series Digital Storage Oscilloscope 49
2. Set the Wave Parameter:
Frequency: Set the output modulation wave frequency.
Amplitude: Set the output modulation wave amplitude.
Y Offset: Set the output modulation wave vertical level offset.
Output: Select output type continuous or single.
Ext Trig: Turn on or turn off external trigger, select rise edge or falle dge.
Wave Param:
Type: Select "AM" or "FM".
Fo: Set the carrier wave frequency.
Depth: Set the wave Depth.
Max Freq: Set the wave Max frequency deviation.
Edit Arbitrary Waveform
User can't edit arbitrary waveform directly under DDS interface for the device. Firstly, please
double click “Setup.exe” in Tools folder and install DDS-ARB software according to installation
wizard. After DDS-ARB software installed successfully, you can see DDS-ARB icon on desktop.
Double-click the icon, user can select "waveform parameters - > Arb" to edit arbitrary waveform.
To Next Page
Loading...
