Need help?Do you have a question about the Hanwell IM6001 and is the answer not in the manual?
Specifies the necessary physical environment and mounting conditions for the SR2 unit's installation.
Details the essential network information, such as static IP, subnet, and gateway, required for SR2 setup.
Step-by-step instructions for physically attaching the SR2 unit to a wall using its keyhole and screw mounting points.
Guides the user on correctly wiring the external receiver unit cable to the SR2's JP14 connector.
Provides instructions for connecting the SR2 to its power source and establishing a network connection via Ethernet.
Details the process for configuring the SR2 unit's network parameters for proper operation on a local or remote network.
To Next Page
General