Harbor Breeze 40314 - Assembly Instructions; Preparation

4
Lowes.com/harborbreeze
SAFETY INFORMATION
CAUTION:
• TURNOFFELECTRICITYatthemainfusebox(orcircuitbreakerbox)beforebeginning
installation by removing the fuse (or switching the circuit breaker off). If you are not sure the lighting
systemhasagroundingmeans,DONOTattempttoinstallthisxture.Contactaqualied,licensed
electrician for information regarding the proper grounding methods as required by the local
electrical code in your area.
• Allxturesmustbemountedtoaceilingfanthatismountedtoanoutletboxthatissupportedby
the building structure.
• DONOTusebulbshavingawattagegreaterthanthemaximumvaluestatedonthexture.The
useofbulbswithhigherwattagethanspeciedwillincreasetemperaturesandriskofre.
• Ifadimmercontrolswitchisusedwiththisxture,obtainprofessionaladvicetodeterminethe
correct type to use as well as the electrical rating required.
PREPARATION
Before beginning the assembly of this product, ensure that all parts are present. Compare all parts
with the package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, pliers, wire
cutters, safety glasses, step ladder, wire connectors (included with fan), and electrical tape
Helpful Tools (not included): Wire strippers, A/C tester light, wiring handbook, soft cloth
ASSEMBLY INSTRUCTIONS
1. Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER: Failure to disconnect the power supply
priortoinstallationmayresultinseriousinjuryordeath.
1