Harbor Breeze 41161 User Manual (English)

Questions and Answers:

C
christopher68Aug 7, 2025
Why is my Harbor Breeze Fan wobbling so much?
- K
  Kurt YoungAug 7, 2025
  Excessive wobbling in your Harbor Breeze Fan can occur if the blades or blade arms are loose; check and tighten all screws that hold the fan blades to the blade arms and the blade arms to the motor. It may also happen if the blades are unbalanced; try switching one blade with a blade from the opposite side, or balance the fan using a balancing kit (sold separately). Finally, the fan mounting might not be secure. In that case, turn off the power, loosen the motor housing, and verify that the mounting bracket is securely attached to the electrical outlet box, ensuring it's flush and without movement.
W
washingtonlauraAug 13, 2025
What to do if my Harbor Breeze 41161 won't turn on?
- J
  jonathan02Aug 14, 2025
  If your Harbor Breeze Fan isn't moving, there are several potential causes. First, ensure the power is on and the fuse is not blown; if it is, turn the power on or check the fuse. Second, a faulty wire connection could be the culprit; turn the power off, loosen the canopy, and check all connections. Third, the plugs might not be connected properly; check that the connectors from the light kit fitter and fan are securely connected. Lastly, the reverse switch might not be fully engaged; push the reverse switch completely to the left or right.
S
Susan EllisAug 21, 2025
What to do if Harbor Breeze Fan lights are not working?
- C
  cwatsonAug 21, 2025
  If your Harbor Breeze Fan is working but the lights aren't, first, ensure the bulbs are correctly installed by re-installing them. Second, check that the light kit wire plugs are properly connected, making sure the male and female plugs in the light kit fitter are securely connected. Third, a faulty wire connection could be the problem; turn the power off and check all connections at the ceiling outlet box.
M
Madeline StevensonAug 29, 2025
How to fix a noisy Harbor Breeze 41161 Fan?
- D
  darlene38Aug 29, 2025
  A noisy Harbor Breeze Fan can be caused by several factors. Check and tighten all screws that hold the fan blades to the blade arms and the motor, as loose blades can cause noise. A cracked blade can also be the source, so replace any cracked blades. Additionally, ensure the outlet box is securely attached to the building structure. Finally, confirm that the mounting bracket is securely fastened to the outlet box and that all screws are tight.