Page 41 of 87
USB to RS232 Converter
If there is no RS232 port, or problems with
the Com port on the computer, use a
converter from USB to RS232.
The systems requirement to use a
converter is:
A computer with Windows XP or later.
USB to RS232 serial converter, Hardi P/N
26025900.
Serial NULL-modem cable, or Hardi
“Communication cable” P/N 72271600.
Install the USB to RS232 serial converter
using the instructions and driver, which
should be included with the USB to RS232
serial converter.
NOTE:
Do not plug the USB-RS232 converter into
the system before the driver is finished
installing
Insert the CD-Rom with the driver in the
drive.
Select “Search for the best driver in these
locations” and “Search removable media
floppy, CD-ROM” and select Next>
At this screen select “Next>”
To Next Page
Loading...
