Page 45 of 87
The upgrading program will tell what kind
of error there is with the connection and
what can be done to solve the problem.
The dialogue box will ask if the software
should be uploaded to the selected
version.
Select “OK”.
The display in the HC5500 will change.
If the display does not change, something
is wrong with the connection.
There are three versions of this window:
One where you have to upload a
new application
One where you have to upload a new boot
and a new application.
The third version is only seen on the
HC5500 with boot software older than v2.4.
This version of the boot software contains
a problem that requires a special update
sequence to be executed.
The only difference between the two first versions is the “Upload new boot…” line. This
is because it isn’t always necessary to upload a new boot, to upload new application
software.
- Click “OK” to upgrade HC5500.
- If HC5500 needs to upgrade boot software it will erase the old one, and the “Hardi
HC Upgrade” will upload a new version.
- Afterwards “Hardi HC Upgrade” will erase the current application on HC5500 and
upload the new one.
To Previous Page
Loading...
Need help?
General
