Hardi NAVIGATOR 3000 User Manual

5 - Operation
62
Filling of Clean Water Tank
To fill the clean water tank:
1. Remove the tank lid.
2. Fill with clean water.
3. Replace the tank lid.
For use of water:
• Turn the ball valve lever to open. The ball valve is located on the
valve cover below the EasyClean filter on the sprayer’s left side.
• The water from this tank is for hand washing, cleaning of clogged nozzles etc.

ATTENTION! Only fill this tank with clean water! To avoid algae developing in the clean water tank, always drain this
tank, if the sprayer is not in use for a longer period of time.
±
WARNING! Although the clean water tank is only filled with clean water, this water must NEVER be used for drinking.

Hardi NAVIGATOR 3000 Specifications

General

Brand	Hardi
Model	NAVIGATOR 3000
Category	Paint Sprayer
Language	English