EasyManuals Logo

Harman Kardon AVR 1600 User Manual

Harman Kardon AVR 1600
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
REMOTE CONTROL FUNCTIONS
Tuning Mode: This button toggles between manual (one
frequency step at a time) and automatic (seeks frequencies with
acceptable signal strength) tuning mode. It also toggles between
STEREO AND MONO MODES WHEN AN &- STATION IS TUNED
Memory: After you have tuned a particular radio station, press
this button, then the Numeric Keys, to save that station as a radio
preset.
Tuning: Press these buttons to tune a radio station. Depending
on whether the tuning mode has been set to manual or automatic,
each press will either change one frequency step at a time, or seek
the next frequency with acceptable signal strength.
Direct: Press this button before using the Numeric Keys to
directly enter a radio station frequency.
Clear: Press this button to clear a radio station frequency you
have started to enter.
Preset Stations Selector: Press these buttons to select
a preset radio station.
Tone Mode: Press this button to access the tone controls
(bass and treble). Use the Navigation Buttons to make your
selections.
Disc Skip: This button has no effect on the receiver, but is
used with some optical disc changers to skip to the next disc.
Macros: These buttons may be programmed to execute long
command sequences with a single button press. They are useful for
programming the command to turn on or off all of your components,
or for accessing specialized functions for a different component
than you are currently operating.
Night Mode: Press this button to activate Night mode with
specially encoded Dolby Digital discs or broadcasts. Night mode
compresses the audio so that louder passages are reduced in vol-
ume to avoid disturbing others, while dialogue remains intelligible.
Track Skip: These buttons have no effect on the receiver, but
are used with many source components to change tracks or chapters.
Dim: Press this button to partially or fully dim the front-panel display.
Transport Controls: These buttons have no effect on
the receiver, but are used to control many source components. By
default, when the remote is operating the receiver, these buttons
will control a Harman Kardon Blu-ray Disc player or a DVD player.

Other manuals for Harman Kardon AVR 1600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Harman Kardon AVR 1600 and is the answer not in the manual?

Harman Kardon AVR 1600 Specifications

General IconGeneral
BrandHarman Kardon
ModelAVR 1600
CategoryReceiver
LanguageEnglish

Related product manuals