Harman Kardon AVR 1710 User Manual

AVR
Front-Panel Controls
Front-Panel Controls
Power
Indicator
Front-Panel
Display
Volume
Knob
Set
Button
IR
Sensor
Power
Button
Left/Right
Buttons
Headphone Jack/
EzSet/EQ
Mic Input
Audio Input
Button
Surround Modes
Select Buttons
Surround Mode
Category Button
Up/Down Buttons/
Tuning Buttons
USB
Port
Tuning Mode Button (AVR
1710/AVR 1610)/
RDS Button (AVR 171/
AVR 161)
Channel Volume
Adjust Button
Source Select
Buttons
4

Harman Kardon AVR 1710 Specifications

Audio Specifications

stereo power	100 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, <0.07% THD
multichannel power	100 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, <0.07% THD
input sensitivity/impedance	250mV/27k ohms
signal-to-noise ratio (IHF-A)	100dB
frequency response (@ 1W)	10Hz – 130kHz (+0dB/–3dB)
high instantaneous-current capability (HCC)	±42 amps
slew rate	40V/sec

FM Tuner Specifications

frequency range	87.5MHz – 108.0MHz
usable sensitivity IHF	1.3µV/13.2dBf
signal-to-noise ratio (mono/stereo)	70dB/68dB
distortion (mono/stereo)	0.2%/0.3%
stereo separation	40dB @ 1kHz
selectivity (±400kHz)	70dB

AM Tuner Specifications

frequency range	520kHz – 1, 710kHz
usable sensitivity (loop)	500µV
distortion (1kHz, 50% mod)	1.0%
selectivity (±10kHz)	30dB

Video Specifications

television format	NTSC
input level/impedance	1Vp-p/75 ohms
output level/impedance	1Vp-p/75 ohms
video frequency response (composite video)	10Hz – 8MHz

General Specifications

power requirement	120V AC / 60Hz
power consumption	<0.5W (standby); 510W maximum
dimensions (H x W x D)	4-3/4" x 17-5/16" x 11-13/16" (121mm x 440mm x 300mm)
weight	11 lb (5.1kg)