Need help?Do you have a question about the Harman Kardon AVR 171S and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| Bluetooth | Yes |
| Wi-Fi | No |
| Dolby TrueHD | Yes |
| DTS-HD Master Audio | Yes |
| Input Sensitivity/Impedance | 200mV/47k ohms |
| Signal-to-Noise Ratio | 100dB |
| FM Tuner Frequency Range | 87.5MHz – 108.0MHz |
| FM Tuner Signal-to-Noise Ratio (Mono/Stereo) | 70dB/68dB |
| FM Tuner Distortion (Mono/Stereo) | 0.2%/0.3% |
| AM Tuner Distortion | 1.0% |
| HDMI 4K Ultra HD Pass-through | Yes |
| HDMI 3D Ready | Yes |
| Connectivity AirPlay | Yes |
| Connectivity DLNA | Yes |
| Power Requirement | AC 120V, 60Hz |
| Amplifier Type | Class AB |
| Frequency Response | 10Hz – 130kHz |
| FM Tuner Stereo Separation | 40dB |
| Dimensions (H x W x D) | 121mm x 440mm x 300mm |
| Weight | 5.1kg |
| AM Tuner Usable Sensitivity | 500µV/m |
Provides crucial safety guidelines regarding voltage, extension cords, power cords, and cabinet openings.
Gives instructions on proper placement for ventilation, stability, and avoiding heat or moisture.
Explains power modes, headphone/mic jack, and USB port functions.
Explains buttons for powering the AVR, muting audio, and selecting sources.
Explains AVR power modes and how remote buttons control them, including Zone 2.
Offers tips and methods for optimal subwoofer placement in a room.
Provides a caution before connecting and guides on connecting speakers.
Guides on connecting the subwoofer and the TV or video display.
Explains connecting various source devices and assigning them to AVR inputs.
Guides on programming the remote to control various audio/video source devices and TVs.
Guides through the speaker setup process, including microphone connection and test.
Details the steps for using the automatic EzSet/EQ speaker calibration process.
Guides on assigning connections and setting playback features for each source device.
Guides through connecting the AVR to a home network and pairing Bluetooth devices.
Covers volume control, muting audio, and using headphones for private listening.
Explains how to select sources and choose surround sound modes via the OSD menu.
Guides on tuning radio stations and playing MP3/WMA files from USB devices.
Explains how to select and play audio files from a USB device.
Guides on connecting and playing music from Apple devices.
Introduces advanced settings and adjustments for optimizing the AVR's performance.
Explains audio signal processing and various surround sound modes.
Guides on manually configuring speaker settings if EzSet/EQ is not used.
Explains how to determine and set crossover frequencies for speakers.
Guides on measuring speaker distances from the listening position.
Details settings for individual speaker presence (On/Off) and assignments.
Explains how to set crossover frequencies for different speaker groups.
Lists available crossover frequency settings for speakers.
Guides on adjusting speaker distances to compensate for arrival time differences.
Explains how to manually set speaker volume levels for balanced output.
Lists causes and solutions for the unit not functioning or having no audio/video output.
Addresses no sound from specific speakers and unresponsive remote controls.
To Next Page