Harman Kardon AVR 1710 User Manual

AVR
Rear-Panel Connectors
6
Rear-Panel Connectors
HDMI/MHL Input
Connector
HDMI Input
Connectors
Power Cord
(AVR 1710)
HDMI Output
Connectors
Analog Video
Connectors
AVR 1710/AVR 171
Subwoofer
Pre-Out
Connectors
Radio Antenna
Connectors
Digital Audio
Connectors
Fan Vents
Speaker
Connectors
Network
Connector
AC Input
Connector (AVR 171)
IR and Trigger
Connectors
Analog Audio
Connectors
HDMI/MHL Input
Connector
HDMI Input
Connectors
Power Cord
(AVR 1610)
HDMI Output
Connector
Analog Video
Connectors
AVR 1610/AVR 161
Subwoofer
Pre-Out
Connector
Radio Antenna
Connectors
Digital Audio
Connectors
Speaker
Connectors
Network
Connector
AC Input
Connector
(AVR 161)
IR and Trigger
Connectors
Analog Audio
Connectors

Harman Kardon AVR 1710 Specifications

Audio Specifications

stereo power	100 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, <0.07% THD
multichannel power	100 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, <0.07% THD
input sensitivity/impedance	250mV/27k ohms
signal-to-noise ratio (IHF-A)	100dB
frequency response (@ 1W)	10Hz – 130kHz (+0dB/–3dB)
high instantaneous-current capability (HCC)	±42 amps
slew rate	40V/sec

FM Tuner Specifications

frequency range	87.5MHz – 108.0MHz
usable sensitivity IHF	1.3µV/13.2dBf
signal-to-noise ratio (mono/stereo)	70dB/68dB
distortion (mono/stereo)	0.2%/0.3%
stereo separation	40dB @ 1kHz
selectivity (±400kHz)	70dB

AM Tuner Specifications

frequency range	520kHz – 1, 710kHz
usable sensitivity (loop)	500µV
distortion (1kHz, 50% mod)	1.0%
selectivity (±10kHz)	30dB

Video Specifications

television format	NTSC
input level/impedance	1Vp-p/75 ohms
output level/impedance	1Vp-p/75 ohms
video frequency response (composite video)	10Hz – 8MHz

General Specifications

power requirement	120V AC / 60Hz
power consumption	<0.5W (standby); 510W maximum
dimensions (H x W x D)	4-3/4" x 17-5/16" x 11-13/16" (121mm x 440mm x 300mm)
weight	11 lb (5.1kg)