Figure 7
View of the binding posts (for the speakers) that are attached to the amp board. In order for the amp board to
be removed, the rear panel has to be removed, along with all the sub assemblies in the center section of this
unit.
Figure 8
View of the other amp board (unit is standing on end). The same procedures apply to this amp assembly as
it does to the other amp assembly. The rear panel, the center stack (See Figures 4 & 5) of PC sub-
assemblies, have to be completely removed, and all the connections taken apart.
AVR8000
harman/kardon
To Next Page
Loading...
