Do you have a question about the Harman Kardon DPR 1005 and is the answer not in the manual?
Continuous Average Power (FTC) | 70 Watts per channel, 20Hz–20kHz, <0.15% THD, both channels driven into 8 ohms |
---|---|
Power per Individual Channel - Front L&R channels | 70 Watts per channel, <0.15% THD, 20Hz–20kHz into 8 ohms |
Power per Individual Channel - Center channel | 70 Watts, <0.15% THD, 20Hz–20kHz into 8 ohms |
Power per Individual Channel - Surround channels | 70 Watts per channel, <0.15% THD, 20Hz–20kHz into 8 ohms |
Input Sensitivity/Impedance | 200mV/47k ohms |
Signal-to-Noise Ratio (IHF-A) | 97dB |
Frequency Range | 87.5–108.0MHz |
---|---|
Usable Sensitivity IHF | 1.3µV/13.2dBf |
Signal-to-Noise Ratio Mono/Stereo | 70/68dB |
Distortion Mono/Stereo | 0.2/0.3% |
Stereo Separation | 40dB @ 1kHz |
Selectivity | ±400kHz, 70dB |
Frequency Range | 520–1720kHz |
---|---|
Signal-to-Noise Ratio | 45dB |
Usable Sensitivity Loop | 500µV |
Distortion | 0.8% @ 1kHz, 50% Mod |
Selectivity | ±10kHz, 30dB |
Television Format | NTSC |
---|---|
Input Level/Impedance | 1Vp-p/75 ohms |
Output Level/Impedance | 1Vp-p/75 ohms |
Video Frequency Response (Composite and S-Video) | 10Hz–8MHz (–3dB) |
Video Frequency Response (Component Video) | 10Hz–50MHz (–3dB) |
Power Requirement | AC 120V/60Hz |
---|---|
Power Consumption - Standby | 8.9W |
Power Consumption - Idle | 52W |
Power Consumption - Max | 760W (7 channels driven) |
Width - Product | 17.3 inches (440mm) |
---|---|
Width - Shipping | 22.6 inches (573mm) |
Height - Product | 4.5 inches (114mm) |
Height - Shipping | 8.9 inches (225mm) |
Depth - Product | 18.8 inches (476mm) |
Depth - Shipping | 21.9 inches (555mm) |
Weight - Product | 23.1 lb (10.5kg) |
Weight - Shipping | 27.5 lb (12.5kg) |