Harman Kardon DPR 1005 Quick Start Guide

Thank you for purchasing a Harman Kardon DPR 1005. This Quick-Start
Guide will help you with a basic system installation. For detailed information
on any step, please refer to the Owner’s Manual pages referenced in this
guide. We strongly recommend that you read the Owner’s Manual for
complete details on how to install, configure and operate the DPR 1005,
as well as for the important safety information it contains.
Figure 1 – Speaker Placement
The colors shown for each speaker correspond to
the matching output terminal connection on the
back of the DPR 1005 (see page 8).
FRONT
LEFT
SPEAKER
(White)
SURROUND
BACK
LEFT
SPEAKER
(Brown)
SURROUND
BACK
RIGHT
SPEAKER
(Tan)
CENTER
SPEAKER
(Green)
SUBWOOFER
(Purple)
SURROUND
LEFT
SPEAKER
(Blue)
FRONT
RIGHT
SPEAKER
(Red)
SURROUND
RIGHT
SPEAKER
(Gray)
Step 1. Place your speakers in the listening room
(see page 19).
SPEAKER PLACEMENT
DPR 1005 QUICK-START GUIDE
Connection Color Guide
Audio Connections Left Right
Front
Center
Surround
Subwoofer
Surround Back
Digital Audio Connections
Coaxial
Optical
Video Connections
Composite
S-Video
Match the colored jacks on the DPR 1005 to the appropri-
ate jacks on your source equipment or speakers. The colors
are standardized, but not all equipment or connectors use
them.

Harman Kardon DPR 1005 Specifications

Audio Specifications

Continuous Average Power (FTC)	70 Watts per channel, 20Hz–20kHz, <0.15% THD, both channels driven into 8 ohms
Power per Individual Channel - Front L&R channels	70 Watts per channel, <0.15% THD, 20Hz–20kHz into 8 ohms
Power per Individual Channel - Center channel	70 Watts, <0.15% THD, 20Hz–20kHz into 8 ohms
Power per Individual Channel - Surround channels	70 Watts per channel, <0.15% THD, 20Hz–20kHz into 8 ohms
Input Sensitivity/Impedance	200mV/47k ohms
Signal-to-Noise Ratio (IHF-A)	97dB

FM Tuner Specifications

Frequency Range	87.5–108.0MHz
Usable Sensitivity IHF	1.3µV/13.2dBf
Signal-to-Noise Ratio Mono/Stereo	70/68dB
Distortion Mono/Stereo	0.2/0.3%
Stereo Separation	40dB @ 1kHz
Selectivity	±400kHz, 70dB

AM Tuner Specifications

Frequency Range	520–1720kHz
Signal-to-Noise Ratio	45dB
Usable Sensitivity Loop	500µV
Distortion	0.8% @ 1kHz, 50% Mod
Selectivity	±10kHz, 30dB

Video Specifications

Television Format	NTSC
Input Level/Impedance	1Vp-p/75 ohms
Output Level/Impedance	1Vp-p/75 ohms
Video Frequency Response (Composite and S-Video)	10Hz–8MHz (–3dB)
Video Frequency Response (Component Video)	10Hz–50MHz (–3dB)

General Specifications

Power Requirement	AC 120V/60Hz
Power Consumption - Standby	8.9W
Power Consumption - Idle	52W
Power Consumption - Max	760W (7 channels driven)

Weight and Dimensions

Width - Product	17.3 inches (440mm)
Width - Shipping	22.6 inches (573mm)
Height - Product	4.5 inches (114mm)
Height - Shipping	8.9 inches (225mm)
Depth - Product	18.8 inches (476mm)
Depth - Shipping	21.9 inches (555mm)
Weight - Product	23.1 lb (10.5kg)
Weight - Shipping	27.5 lb (12.5kg)