Harman Kardon DPR 1005 - Safety Information; Important Safety Information; Installation Location; Cleaning

DVD PLAYER
VCR (Video 1)
In/Rec
Out/Play
L R Video
Component Video
Y
Pb
Pr
Optical Coax
Satellite Receiver (Video 4)
Out
L R Video S-Video
Optical Coax
Component Video
Y
Pb
Pr
Cable Box(Video 3)
Out
L R Video S-Video
Optical Coax
TV or Video Display
In
Video S-Video Component Video
Y Pb Pr
L R Video S-Video
VIDEO CONNECTIONS
Device Connection Options: Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 5, Coaxial 3 and Optical 3 inputs are on the front panel of the receiver.
Device Input Name Audio Input Connections Audio Output Connections Video Connections
CD Player CD CD L/R Inputs, Optical Digital 1 or 2, or Coaxial Digital 1 or 2 Not required Not required
DVD Player DVD Coaxial Digital 1 or 2, Optical Digital 1 or 2, or DVD L/R Inputs Not required Component V1, DVD Composite or S-Video
VCR Video 1 Video 1 L/R Inputs Video 1 L/R Outputs Video 1 Composite or S-Video Input and Output
Cable Box Video 3 Video 3 L/R Inputs, Optical Digital 1 or Coaxial Digital 3* Inputs Not required Component V2, Video 3 Composite or S-Video
Satellite Receiver Video 4 Video 4 L/R Inputs, Optical Digital 3*or Coaxial Digital 3* Inputs Not required Component V2, Video 4 Composite or S-Video
Audio Recorder Tape Tape L/R Inputs, Optical Digital 1/2** or Coaxial Digital 1/2** Inputs Tape L/R Outputs, Digital Optical** or Coaxial Outputs** Not required
TV or Video Display Not applicable Not required Not required Monitor-Out Component, Composite and/or S-Video
*
Check with your cable or satellite company to determine whether digital audio is available for all channels. It may be necessary to make BOTH analog and digital connections if it is not.
**
Digital audio recorders only.
250 Crossways Park Drive,Woodbury, New York 11797 www.harmankardon.com © 2004 Harman International Industries, Incorporated Part No. ZKD0352HA00-2
Power for the Digital Revolution.
®
®
Figure 5 – Video Connections
Dashed lines (––––) indicate coaxial and optical digital audio connections. Choose either type
(but not both) for each digital audio source.
Dotted lines (
••••) indicate component, composite or S-Video connections. Component video is the
preferred connection when available, but you may use any of the three types (but not more than one).
When component, composite and S-Video sources are connected to the DPR you must also connect
all outputs from the DPR to your TV.