EasyManua.ls Logo

HARNITEK Thermopod - Important Information and Safety Precautions; Safety Symbols and Warning Indicators; Product and Packaging Disposal Guidelines; General Safety Information

HARNITEK Thermopod
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 Important information
This manual is intended as a general guide and does not supersede local codes in any way. Consult authorities
having jurisdiction before installation. This appliance must only be installed by a qualified person who is certified and
trained to operate solar assisted heat pump system.
On receipt of Thermopod, all parts must be checked for damage before signing. Any damage related to
transportation is the responsibility of the purchaser’s shipping company and should be promptly addressed.
The Thermopod must be used only indoors in applications for which it was intended. Any misuse of this unit can
cause personal injury and/or damage to equipment.
Do not modify any electrical connections of the Thermopod solar assisted heat pump system without permission.
Otherwise, it will invalidate the guarantee. If the units are installed at place where the voltage is unstable, voltage
stabilizers are required. Further details please consult with local electrician.
Please note that HARNITEK, as the manufacturer, decline any responsibilities as regards damages deriving from an
incorrect installation and a failure to follow the instructions detailed in the document. Any damage or mal-function of
systems caused by non-conformance with this manual and/or any deviation from this manual will invalidate the
guarantee.
Marking
Thermopod is CE marked.
The CE marking means that HARNITEK ensures that the product meets all regulations that are placed on it based on
relevant EU directives. The CE mark is obligatory for most products sold in the EU, regardless where they are made.
Symbols
Caution
This symbol indicates important information about what you should pay attention to when install and/or maintain the
units.
Warning
This symbol indicates danger might occur on machine or person.
Note
This symbol indicates tips that help to facilitate the usage of the product.
Disposal
Leave the disposal of the packaging to the installer who installed the product or to special waste
stations.
Do not dispose of used products with normal household waste. It must be disposed of at a special
waste station or dealer who provides this type of service.
Improper disposal of the product by the user results in administrative penalties in accordance with
current legislation.
2 Safety information
Before install the unit, make sure you read all the “Safety precautions”.
Please report to your supply authority and obtain their consent before connecting this equipment to the power supply
system.
After installation, perform the test run to ensure normal operation. Then explain to the actual users for the Safety
Precautions”. Use and maintain the units according to the detail steps on the Operation Manual provided by the
manufacturer.
Thermopod - Installation Manual 2 | Page