HARNITEK Thermopod - Supplied Components and Kits; Standard Fittings Included; Water Fittings and Accessories; Panel Installation Components

4 Supplied Components
Packaging
Standard & Water Fittings kits are packed in the same box
with Thermopod panel.
Standard Fittings
Water Fittings - Accessories
L - Brackets x 12
Fused Spur 13A &
Socket Box x 1
3/4" M22*300mm
Flexible Hoses x 2
Hydraulic Seal x 2
Ball Valves x 2
Panel installation
Philips Self-tapping Screws x 12
Philips Hex Head Screws x 12
Light Duty Finned Anchors x 12
Flange Nuts x 12
Unit installation
Philips Self-tapping Screws x 4
Philips Hex Head Screws x 4
Light Duty Finned Anchors x 4
Anti-vibration mounts x 4
Brass Inline Y Filter x 1
3/4 Non-return Valve x 1
1/4” Inlet Line Connection x 1
3/8” Outlet Line Connection x 1
9.52mm * 250mm long thin
Pipe x 1
22mm/10mm * 65mm
Adapter x 1
Spares
Philips Self-tapping Screws x 2
Philips Hex Head Screws x 2
Light Duty Finned Anchors x 4
Flange Nuts x 2
Spares
Fuse 20A x 1
Fuse 5A x 1
Fuse 13A x 1
Screw x 4
3/4” 22mm Brass Fittings x 6
22mm Elbow x 1
22mm Equal Tee x 1
Note
The above mentioned water fittings are cutting ring fitting. If users need different kinds of water fittings or the water
pipe between Thermopod and the cylinder, please contact local sales person.
There are several ways for water connection. More details please consult local professional installer.
Always choose a solid and strong wall to install Thermopod units, otherwise, it may cause a risk of loosening or fall-
off.
Thermopod - Installation Manual 5 | Page