HARNITEK Thermopod - Thermopod Panel Specifications; General Panel Features; Thermopod Panel Dimensions and Weight

Thermopod Panel Specifications
General
Finish:
Powder coated aluminium panel
Material Thickness:
2mm aluminium for increased mechanical strength
Protection:
Corrosion resistant and adaptability to all weathers
Fixing Orientation:
Can be installed in a landscape or portrait
Fixing Points:
Six fixing points per panel
Installation Angle:
Minimum of 10 degrees up to 80 degrees on vertical walls
** DO NOT LAY FLAT AS THIS WILL EFFECT THE FOLW OF R134a **
Dimensions and Weight
Unit
Height
mm
2000 (+-2mm)
Width
mm
800 (+-2mm)
Frame Depth
mm
25
Weight
kg
8.9
Thermopod - Installation Manual 7 | Page