Harris Micromax FM Exciter Operation REV1 01/12/2007
3-1
WARNING: Disconnect primary power prior to servicing
SECTION 3
Operation
3.1 Introduction
This section of the manual contains information on how to operate the exciter and covers the following
topics:
• Turning on the transmitter (3.2)
• Adjusting RF power output (3.3)
• Operating frequency selection (3.4)
• Adjusting modulation deviation level (3.5)
• Front panel LCD display menu description (3.6)
3.2 Turning on the unit
Prior to turning on the exciter, make sure that the unit is installed as outlined in Section 2 of this manual.
Turn on the exciter using the on/off switch on the front panel.
Turn on/off here
To Next Page
Loading...
