Harris Micromax FM Exciter REV 1 01/12/2007
WARNING: Disconnect primary power prior to servicing
TABLE OF CONTENTS
Page
SECTION 1 General Description
1.1 Introduction 1-1
1.2 Equipment function 1-1
1.3 Physical description 1-1
1.4 Electrical description 1-2
1.5 Simplified block diagrams 1-2
1.6 List of subsystems 1-2
SECTION 2 Installation
2.1 Introduction 2-1
2.2 Unpacking 2-1
2.3 Returns and exchanges 2-1
2.4 Installation 2-1
2.4.1 A/C power connection 2-1
2.4.2 RF output connection 2-2
2.4.3 Audio input connections 2-2
2.4.3.1 MPX (composite) audio input connection 2-3
2.4.3.2 Mono audio input connection 2-3
2.4.3.3 Left and right channel audio inputs 2-4
2.4.4 Remote I/O connector 2-5
2.4.5 Service connector 2-6
SECTION 3 Operation
3.1 Introduction 3-1
3.2 Turning on the exciter 3-1
3.3 Adjusting RF power output 3-2
3.4 Operating frequency selection 3-3
3.5 Adjusting modulation deviation level 3-4
3.6 Front panel LCD display menu description 3-5
3.6.1 Operations menu 3-5
3.6.2 Power menu 3-6
3.6.3 Power amplifier menu 3-6
3.6.4 Miscellaneous menu 3-6
3.6.5 Versions menu 3-6
3.6.6 Channels menu 3-6