Harris Unity XG-100P - Page 104

104
XG-100
PROGRAMMING
5
7. Use to highlight and
select RX FREQUENCY.
8. Enter new receive
frequency.
9. Use to select OK.
10. Use to cancel.
11. For digital channel, modify
remaining channel
settings:
• TX FREQUENCY -
Transmit frequency.
• TALKGROUP -
Talkgroup name
cannot be set here.
• RX NAC - Network
Access Code (NAC)
radio uses for selective
squelch in receive.
• TX NAC - NAC radio
transmits to break
selective squelch on
receiving radio
(Monitor and Squelch
Types).
DIGITAL
CHANNEL
SHOWN