Harris Unity XG-100P - Page 105

105
XG-100
PROGRAM M ING
5
12. For analog channel, modify
remaining channel
settings:
• TX FREQUENCY -
Transmit frequency.
• RX SQUELCH -
Squelch type radio
uses in receive.
• RX TONE - Tone radio
uses to break selective
squelch on receiving
radio (Monitor and
Squelch Types).
• RX CODE - Code radio
uses to break selective
squelch on receiving
radio (Monitor and
Squelch Types).
• TX SQUELCH -
Squelch type radio
uses in transmit.
• TX TONE - Tone radio
transmits to break
selective squelch on
receiving radio
(Monitor and Squelch
Types).
• TX CODE - Code radio
transmits to break
selective squelch on
receiving radio
(Monitor and Squelch
Types).
Channels configured with TX
SQUELCH type of CDCSS A or
CDCSS B use RXCODE and
TXCODE.
Channels configured with TX
SQUELCH type of CTCSS use
RXTONE and TXTONE.
ANALOG
CHANNEL
SHOWN