12/20/11 888-2595-001 1-7
WARNING: Disconnect primary power prior to servicing.
Section 1 Introduction
ZX Series
Figure 1-3 Positions of PA and PS modules in various ZX series transmitter models
The transmitter models at 7.5kW and above are made by combining the outputs of
multiple ZX3750 or ZX5000 amplifier chassis in an integrated system. The number of
amplifier chassis per model is as follows:
ZX7.5 = 2 x ZX3750
ZX10 = 2 x ZX5000
Additional information on important transmitter parameters, such as size, weight, and
power consumption, may be found in drawing 839-8464-033 Outline Drawing, ZX
Transmitters in the drawing package accompanying this manual.
To Next Page
Loading...