1
AUTOMATIC EXPOSURE MODES
Select Exposure Mode by turning the Mode Dial (1).
Automatic exposure provides a choice of two ways to control the
shutter speed and aperture settings semi automatically and two
ways fully automatically.
Aperture priority A
The aperture is manually chosen by turning the Front Scroll
Wheel, and the shutter speed is automatically chosen by the
camera.
Shutter priority S
The shutter speed is manually chosen by turning the Front Scroll
Wheel, and the aperture is automatically chosen by the camera.
Programmed P
In this mode, an aperture/shutter combination is chosen by
the camera according to the EV measured (metering method
remains as your choice), though only within preset appropriate
limitations to suit various requirements and applications.
Full Auto
In this mode, an aperture and shutter combination is set by the
camera. The camera is always in AF Mode and no adjustments
can be made. White Balance is set to Auto, Metering Method is
Centre Weighted and Drive Mode is set to Single Drive Mode.
Note!
In Automatic mode the Front Scroll Wheel selects alternative
aperture/shutter combinations while maintaining the same
EV and the Rear Scroll Wheel alters the amount of exposure
compensation. The compensation appears as a +/- symbol on
the Control Screen and Viewnder Display.
Note!
Aperture and shutter speed settings can both be changed even
while the red “busy light” on the Touch Display is ashing.
Note!
In Camera Settings, the Quick Adjust function can be set to
either adjust the following exposure only (default) or on all future
exposures.
X1D www.hasselblad.com
USER GUIDE
37
Functions
Table of Content
To Next Page
Loading...
