EasyManua.ls Logo

Hasselblad X1D-50c - Iso and White Balance

Hasselblad X1D-50c
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ISO AND WHITE BALANCE
ISO and White Balance are set either on the Camera Grip, the
Touch Display or, when tethered, in Phocus.
On the Camera Grip, the ISO / WB Button (A) provides
immediate access to ISO and White Balance settings.
The front scroll wheel (B) and Rear Scroll Wheel (C) are
used to make the desired changes. These appear on the
Touch Display and in the Electronic Viewnder (EVF).
For the Touch Display, settings are changed on the Touch
Display or by using the soft buttons next to the display.
The settings are automatically and simultaneously adjusted
within the Camera and changes display on both the Touch
Display and in the Electronic Viewnder.
Note!
The changes are only displayed on the Touch Display after the
settings have been saved. See more information about making
manual White Balance settings in the ‘Touch Display Settings’
section.
ISO
1 Press ISO / WB button (A).
2 Turn the Front Scroll Wheel (B) to select ISO setting.
White Balance WB
1 Press ISO / WB button (A).
2 Turn the Front Scroll Wheel (B) to select WB (Auto AWB,
Daylight, Shade, Cloudy, Flash, Fluorescent, Tungsten or
Manual WB).
3 To set the Colour Temperature manually, turn the Front
Scroll Wheel (B) until “M/WB” is displayed. Then the Colour
Temperature value is displayed at the bottom of the screen.
4 Use the Rear Scroll Wheel (C) to set the Manual WB.
Note!
White Balance settings are technically not necessary for 3F/3FR
les. The raw format les contain all the information required
for correction in Phocus and/or other software, regardless of
the original colour temperature of the light source or colour
temperature setting of the camera at the time of exposure.
If you intend to shoot RAW & JPEG or use Phocus for JPEG
production and plan to deliver or print the JPEG les directly,
then you should make a White Balance setting.
Note!
ISO and White Balance settings are made either on the Camera
Grip or the Touch Display. The settings are automatically
updated on both the Touch Display and the Electronic Viewnder.
ISO
f
100
331
EV
12.0
5.6 125
1
2
0.0
EXPOSURE MODE
Auto Cloudy Shade
Daylight Tungsten
Flash Manual
Flourescent
X1D www.hasselblad.com
USER GUIDE
74
Functions
Table of Content
A
B
C

Table of Contents

Related product manuals